EN
130
1
1
2
2
1
1
1.
2.
1.
2.
1.
2.
FIT BIT
Pull the chuck sleeve forward and in-
sert the required bit into the chuck
1
.
Release the chuck sleeve.
Caution!
Before changing bits, cen-
tre the rotation direction switch, in
order to lock the too
l.
1
To release the battery, press the bat-
tery release switch
5
and slide off the
tool.
2
REMOVE BIT
Pull the chuck sleeve forward and re-
move the bit. Release the chuck sleeve.
2
ATTACH BATTERY
Slide the battery
6
(not included) onto
the tool until you hear a click.
Caution!
Only use the batteries
specified in technical data.
1
ROTATION DIRECTION
To drive in screws, set the rotation di-
rection switch
8
to
.
Caution!
Wait until the chuck has
stopped rotating before changing
the rotation direction.
1
To loosen screws, set the rotation di-
rection switch
8
to
.
2
Adjustments
