Pattfield PE-1200, Instructions Manual

Page: 61 / 63

EN 108 EN 109
2 1
1
1
1. 1.
2. 2.
2
1. 1. 2. 2.
1. 1.
2. 2.
1 2
1. 1.
2. 2.
2
1
1. 1.
2. 2.
2
Set the rear hammer-drill/ drill switch 6
to hammer-drill .
2
DEPTH GAUGE
Loosen the auxiliary handle 3 and slide
the depth gauge into the auxiliary han-
dle 3 .
Set the desired clearance of the depth
gauge and tighten the auxiliary handle
screw securely.
2 1
HAMMER-DRILL FUNCTION
Press the locking button and set the
top hammer-drill/ hammer switch 7 to
hammer-drill
1
DRILL FUNCTION
Press the locking button and set the
top hammer-drill/ hammer switch 7 to
hammer-drill .
1 Set the rear hammer-drill/ drill switch
6 to drill .
2
Caution! Only set operation modes
while the aplliance is switched off.
Caution! Only set operation modes
while the aplliance is switched off.
Caution! Make sure the tool is
switched off and unplugged.
Set the rear hammer-drill/ drill switch 6
to hammer-drill .
2
HAMMER FUNCTION
Press the locking button and set the
top hammer-drill/ hammer switch 7 to
hammer .
1
Caution! Only set operation modes
while the aplliance is switched off.
DUST COVER
Attach the dust cover to the chisel or
drill.
Use the dust cover to prevent dust from
falling on you or the tool when perform-
ing overhead drilling-operations.
2 1
Caution! Make sure the tool is
switched off and unplugged.