EN
120
EN
121
Using the tool
Warning!
Risk of serious injuries.
Do not turn the tool towards your-
self, other people or animals.
1.
Follow the instructions in section „Prepa-
ration“ („Handle assembly“ to „Insert
chisel“) before use.
2.
Plug the power cord into a suitable wall
socket.
3.
Hold tool firmly with both hands at its
handle
and auxiliary handle
. Stand
securely.
4.
To turn on the tool press and hold the on/
off button
. The tool will start vibrating.
5.
To lock the tool, press the on/off button
and press the locking knob
.
6.
Run the hammer unloaded for a few
seconds for lubricating purposes when
the ambient temperature is low or after
breaks.
7.
Set the hammer with the chisel tip onto
the working surface. The chiselling will
start automatically.
8.
To switch off the tool, release the on/ off
button
. To release the locking knob
press the on/off button
shortly and re-
lease it.
Product overview
1
Auxiliary handle
2
Clamping knob
3
Tool holder
4
Chisel
5
Locking bolt
6
Screw plug for lubricating tank
7
Handle
8
On/off button
9
Locking knob
Intended use
This tool is intended
– for chipping and demolition work in con-
crete, stone and equivalent material.
– only for private use.
– to be used according to the descriptions
and safety instructions indicated in this op-
erating manual.
Any other use is not as intended. Improper use
is not covered by the warranty and the manu-
facturer will reject any liability. The user is li-
able for all injuries to third parties and damage
to their property.
1
2
HANDLE ASSEMBLY
Release the clamping knob
by turning
counterclockwise.
Warning!
Make sure the tool is
switched off and unplugged.
Set the desired position of the auxilia-
ry handle
and tighten the clamping
knob
by turning it clockwise.
Preparation
1x
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
2x
1x
2x
1
3
4
2
8
5
6
7
9
2
1
1.
1.
2.
2.
3.
3.
1x
