Pattfield 4306517559557, Manual

Page: 62 / 65

EN 122 EN 123
FIT CHISEL OR DRILL
Slide back the chuck ring 2 . Fit the
SDS-plus chisel or drill into the chuck 3 .
Caution! Make sure the tool is
switched off and unplugged and
wear protective gloves.
1 Relase the chuck ring 2 and ensure that
the chisel or drill is securely fixed.
(To remove the chisel or drill, slide back
the chuck ring 2 again and pull out the
chisel or drill.)
2
DRILLING
Push the button on the function dial 1
and set the function dial to drill .
Caution! Only set operation modes
while the chuck ring is standing still.
1 For drilling push in the rotation direc-
tion switch 9 on the side with the arrow
pointing forward.
Push in the rotation direction switch on
the side with the arrow pointing back-
wards to release jammed drills.
2
INCREASING SPEED
The deeper the on / off switch 6 is
pressed, the faster the rotation.
Turn the speed dial 7 clockwise to in-
crease the max. speed.
REDUCING SPEED
Release the on / off switch 6 slightly to
reduce speed.
Turn the speed dial 7 counterclockwise
to reduce the max. speed.
2 1
HAMMERING WITH FLAT CHISEL
Push the button on the function dial 1
and set the function dial to hammering
with fixation .
Caution! Only set operation modes
while the chuck ring is standing still.
2
HAMMERING WITH POINT CHISEL
Push the button on the function dial 1
and set the function dial to hammering
without fixation or with fixation .
Caution! Only set operation modes
while the chuck ring is standing still.
1
HAMMER-DRILLING
Push the button on the function dial 1
and set the function dial to hammer-
drill .
Caution! Only set operation modes
while the chuck ring is standing still.
1 For hammer-drilling push in the rota-
tion direction switch 9 on the side with
the arrow pointing forward.
2
2
1
1
1
2
1. 1.
2. 2.
1
1
2
2
2