EN
85
Technical Data
Nominal voltage
220-240 V / ~50 Hz
Rated power
200 W
Noload speed (n
0
)
12000/min
Size of base plate
90 x 187 mm
Weight
1.33 kg
Orbital diameter
1.6 mm
Protection Class
/ II
Sound pressure level (L
pA
)
74.9 dB(A) / Uncertainty K = 3 dB(A)
Sound power level (L
wA
)
85.9 dB(A) / Uncertainty K = 3 dB(A)
Max. vibration emission (a
h
)
Front handle
6.662 m/s
2
/ Uncertainty K = 1.5 m/s
2
Rear handle
8.094 m/s
2
/ Uncertainty K = 1.5 m/s
2
Dust collection system
Use of dust collection can reduce dust-related
hazards.
To prevent personal injuries, make sure to use
the dust box or connect a suitable vacuum
cleaner to the dust port. The dust port is ca-
pable of a connector of 35 mm.
If the dust box is used, make sure it is not full
or clogged. To clean the dust box, remove it
from the dust port
6
by pulling it straight back-
wards. Carefully shake the dust box with the
opening pointing downwards to remove the
sanding dust.
Noise & Vibration
The declared vibration total value and the de-
clared noise emission values have been meas-
ured in accordance with a standard test meth-
od (EN 62841) and may be used for comparing
one tool with another. The declared vibration
total value may also be used in a preliminary
assessment of exposure.
Warning!
The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
Warning!
It is necessary to identify
safety measures to protect the op-
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
