EN
87
SANDING PAPER
Remove any dust or debris from the
sanding pad
4
.
Caution!
Make sure the tool is
switched off and unplugged.
1
Align the holes in the sanding paper
with the ones in the sanding pad
4
and
press the sanding paper into place.
Choose the correct grain size from the
table below:
2
SPEED SETTING
Use speed dial
1
to set the operation
speed.
Caution!
Make sure not to cover the
ventilation slots during operation.
1
The operation speed can be set in 6
steps from:
1
= 6000/min -
MAX
= 12000/min
2
To remove the sanding paper carefully
peel it off the sanding pad
4
.
Do not use the same sanding paper
for metal and wood.
3
OPERATION
GRAIN SIZE
Removal
40 - 60
Preparation
80 - 120
Finish
180 - 240
DUST BOX
To connect the dust box
6
, align the two
nozzles of the adapter
5
with the two
grooves inside the dust box.
Caution!
Never use the tool without
the dust box or a vacuum cleaner at-
tached.
1
Emtying the dust box
6
: Turn the dust
box 15° anti-clockwise and withdraw it
from the tool.
2
Pull up the cover
8
at its latches
7
on
both sides. Empty the dust box. Click
the cover back in place.
3
Push the dust box
6
onto the stud at the
tool and turn it 15° clockwise.
Instead of the dust box you may con-
nect an appropriate vacuum cleaner to
the stud.
4
