Pattfield Ergo Tools PE-ARM 3336 Li, Manual

Page: 121 / 128

EN 121
Troubleshooting
Caution! Make sure the appliance is switched off and the batteries are removed. Al-
ways wear protective gloves.
Problem
Possible cause Solution
Motor does not
run
Battery empty Recharge battery
Unsuitable cutting areas Start on short or already mown grass.
Blade is blocked Clean discharge chute and housing
(blade must rotate freely)
Safety plug is not connected Connect safety plug
Battery is not correctly inserted Remove battery and insert again
Wrong cutting height
Set the wheels to the correct cutting
height
Motor power
drops
Wrong cutting height Set the wheels to the correct cutting
height
Discharge chute is blocked Clean discharge chute and housing
(blade must rotate freely)
Poor and uneven cut Replace the blade (contact service
center)
Collection bag
is not filled
suitably
Unsuitable cutting areas Set the wheels to the correct cutting
height
Allow lawn to dry
Poor and uneven cut Replace the blade (contact service
center)
Collection bag is full Empty the collection bag
Discharge chute is blocked Clean discharge chute and housing
(blade must rotate freely)