EN
106
EN
107
SANDING PAPER
Remove any dust or debris from the
sanding pad
2
.
1
Align the holes in the sanding paper
with the ones in the sanding pad
2
and
press the sanding paper into place.
Choose the correct grain size from the
table below:
2
SPEED SETTING
Use speed dial
4
to set the operation
speed.
1
The operation speed can be set in six
steps from:
1
= 6000/min -
6
= 11000/min
2
Caution!
Make sure the tool is
switched off and unplugged.
To remove the sanding paper carefully
peel it off the sanding pad
2
.
3
OPERATION
GRAIN SIZE
Removal
40 - 60
Preparation
80 - 120
Finish
180 - 240
Do not use the same sanding paper
for metal and wood.
Caution!
Make sure not to cover the
ventilation slots during operation.
Care & Maintenance
Caution!
Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean. Use
a soft brush to remove any accumulated
dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution!
If the supply cord is dam-
aged, it must be replaced by the man-
ufacturer or its service agent or similarly
qualified person in order to avoid hazard.
1
2
1
3
