15
GB
Checking the gear oil (Fig. 15)
The oil drainage screw is fitted to the right side of the
gear box. If necessary, dismantle the blades.
n
Place the electric hoe on its left side to ensure
that no dirt or foreign bodies get into the gears.
n
Use a 5 mm Allen key to open the oil drainage
screw and let the oil drain off into a container.
n
Refill the equipment with new and high-grade
motor lubricating oil.
n
Screw the oil drainage screw back in place.
Transport
Important.
Switch off the motor before transporting
the equipment. If you pull the electric hoe over hard
ground, the blades and the equipment may be
damaged even with the motor switched off. Make sure
that the equipment does not come into contact with
such a surface.
8.4 Ordering replacement parts
Please quote the following data when ordering
replacement parts:
n
Type of machine
n
Article number of the machine
n
Identification number of the machine
n
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
Anleitung_E_EBH_750_SPK7__ 19.03.14 09:22 Seite 15
