QUICK START MANUAL • Spectra Essential
Refer to the user manual for more detail.
467896340 - Quick Start - 01-2010
Setting the movement parameters
Press the On/Off switch next to the power supply cable.
Press the button to
start
movement with the settings used pre-
viously.
Press the button to
stop
movement.
Press the button to
restart
movement in the opposite direction.
To change the
extension limit
: press the button,
then the or buttons within 5 seconds to set the limit.
To change the
flexion limit
: press the button,
then the or buttons within 5 seconds to set the limit.
Locking/unlocking
the handle,
Press the and buttons at the same time.
Installing the patient
• Stop the machine in a position that is
comfortable for the patient
.
• Loosen both buttons (1) and extend the
foot plate
(2) as far as it will go.
• Measure the patient's
femur length
(L).
• Loosen both buttons (3) then
transfer the measurement
to the gra-
duated scale (4), tighten both buttons (3).
•
Install the patient on the machine
.
• Bring the board (2) into contact with the patient's foot, then tighten
both buttons (1).
L
2
3
1
4
EN
