RENTQUIP USA INC. | 1-800-818-1199 | WWW.PATRONPRODUCTS.COM
E3 PRODUCT MANUAL
RENTQUIP USA INC. | 1-800-818-1199 | WWW.PATRONPRODUCTS.COM
MAINTENANCE
WARNING!
NEVER SERVICE THE HEATER WHILE IT IS PLUGGED IN, RUNNING OR HOT. SEVERE BODILY INJURE
OR ELECTRIC SHOCK MAY OCCUR.
ONLY QUALIFIED PERSONS ARE ALLOWED TO OPEN HEATER FOR SERVICE. NO USER-SERVICE-
ABLE PARTS INSIDE.
• Keep heater clean. Use pressurized air to blow fan blades clean. Note! Use moderate pressure to avoid
damage to fan blades
• Inspect heater before and after each use
• The fan motor is sealed and has permanently lubricated bearings
STORAGE
When not in use, the heater must be disconnected from power source, cleaned of dust and stored in a dry
place.
The power supply cord should be loosely wound around the handle of the heater.
TECHNICAL SPECIFICATIONS
HEAT OUTPUT
BTU/Hr
10,200 (3,000W)
AIRFLOW
CFM
205
ELECTRIC CONNECTION
V ac / Hz
240 / 60 single phase
AMPERAGE DRAW
A
12.5
POWER CORD
3x16 AWG
PLUG
NEMA 6-15P
EXTENSION CORD
min. 3x12 AWG
AMBIENT THERMOSTAT
temp. range
32 - 100 °F (0 - 40 °C)
LENGTH
inches
11.8
WIDTH
inches
10.2
HEIGHT
inches
15.2
WEIGHT
lbs
20.3
