1
2
3
4
Remove the cartridge cap from the
cartridge. Firmly install the dispensing
nozzle**. It is important to install the
nozzle outside of the Steel casing.
** In APOLLO Dabber install NYX Nozzle.
Disassemble your APOLLO. Insert
the cartridge into the steel casing.
Assemble casing, housing disc and
threaded piston.
To dispense the product slowly turn
the piston clockwise. Each notch on
the scale dispenses 0.01 mL. Wait a
few seconds to dispense desired
amount of extract if using thicker
materials.
For storage turn the piston
counter-clockwise. It is important to
back the piston right off the gasket to
remove all pressure from the system.
After that place the nozzle cover on
the nozzle.
Assembly guidelines
Pictures and instructions are applicable to
APOLLO Dispenser
and
APOLLO Dabber 2 mL or 5 mL.
Caution:
Dropping APOLLO may result in nozzle breakage. Store dispenser / dabber properly after use.
