4.4.8
Setup home stay
arm
zones
4.4.9
odify
Zone
Name
M
4.4.10
Check
Sensors’ Status
2
2
4
1. Enter
into sensor management interface,
click the icon of home stay arm.
1. Click
related
host to get into
users management interface.
1.
Enter into
sensor
management
interface, choose the zone.
1.
Click
into
sensor
management
interface
,
choose the
zone.
2.
In pop up window, switch to
OFF status and confirm.
2
.
Click
related
icons
to
check alarm messages.
Click “Delete Alarm”to delete all the red bubbles.
1. Intrusion detectors (Door Sensor/ PIR motion sensor/ More detectors) only can be triggered to alarm when host is in
ARM status. Other types detectors (SOS button / medical call button / fire detector) can directly trigger to alarm even in
disarm status.
2. In Home Stay ARM status, the switch of intrusion detectors needs to turn on so that can be triggered to alarm.(Default
for newly added detectors arehome stay arm detectors, user can modify the zone types, details please refer Step 4.4.8 ).
3. If sensors had been triggered to alarm, there will be a red spot on sensor management interface. Other types such as
(operating record/power failure/ temper switch) alarm message will appear in “Alarm Records”, with a red spot there.
After checked, the red spot will disappear. Or click “clean” to delete all red spot.
4.Different type of alarm message, APP will push different alarm music to inform users.
5. If turn on “ when GSM network breakdown, APP push message alert” function, when the host detect there is something
wrong with the GSM network, APP will push message to alert all the users.
6.If turn on “When WiFi network breakdown, auto change to GSM network” function, when WiFi network breakdown, Host
will send SMS to the 3 preset SMS numbers for reminder.
7. When those sensors such as door/window sensor, PIR detector, gas detector, water detector, smoke detector are
disconnected with alarm host, APP will push alert message (without SMS alert message), and in sensors management
interface the related icon will be in grey color.
8.When those sensors such as door/window sensor, PIR detector, gas detector, water detector, smoke detector are in low
battery, the APP will push low battery alert message every two hours. ( This function can be turn off), also in sensor
management interface there will be low battery icon listed.
9. Door sensor closed/open status can be checked and if door had not been closed properly when host armed, APP will
push alert message, also in sensor management interface there will be door open/closed status icon listed.
2
.
In pop up window, input new name,
for example, “Front Door Alarm”.
2
.
The
management interface of
door/window sensors.
3.
After setup, the sensors are not in status of
home stay. It will not be triggered to alarm
when the panel in home stay mode.
3
.
Modified
successfully
.
Note
:
All
new
added
sensors
are
in home
stay
arm
zone, the
following
steps can cancel home stay arm zone.
Door/window open
Door/window
sensor disconnected
Door/window closed
Door sensor low battery
4.4.11 Check
Alarm
Records
4.4.12 APP Alarm Handling and Some Notices
Red
Icon Unread
Alarm
Records
Grey Icon: NO Alarm Records
:
Click
here
can
check
all hosts
alarm records.
As
pictures
shows
:
There
are
two
unread
water
leakage
alarm
message.
15
14
2
Gate
Detector 001
Front
Door Alarm
Detector 003
Detector 004
