28
OPERATION
Personal protective equipment
•
Wear protective gloves.
•
Wear protective goggles.
•
Wear hearing protection for protection from continuous noise in the work place.
•
Wear dust mask for protection from airborne dust.
Check whether the type of the plug corresponds with the type of the socket.
The data on the nameplate must correspond with the actual power supply voltage.
Warning! Risk of injury! Make sure that the On/Off switch (1) is in Off position before
plugging the power cord to the outlet. Pay attention when working that the air vents
are not covered up or congested.
Switching on
Flip the O/I cradle switch (1) to position marked “I”.
Switching off
Flip the switch (1) back to position marked “O”.
Sanding
•
Pay attention to apply uniform sanding pressure; this increases the working life of the sanding
sheets. Do not exert too much pressure on the tool.
•
Regularly check the condition of the sanding sheet. Replace when necessary.
•
On very uneven surfaces, start with a coarse grit and gradually change to a fine grit for smooth finish.
•
Always choose a suitable sanding paper for the material being worked on (wood, steel, paint etc.).
Summary of Contents for VB0210
Page 2: ...2 A...
