7
CAUTION:
DO NOT MOVE FILTER MACHINE DURING USE.
DO NOT TOUCH FILTER TANK. IT CONTAINS HOT FRYING OIL.
7.
Position the discharge nozzle over the fryer. Turn the power switc
h
to the
“ON” position. With the drain open,rinse the crumbs and sediment form the
fryer with hot oil.
8.
After debris is rinsed from fryer, turn the power switch
”OFF” and close fryer
drain.
9.
Insert the discharge nozzle into the tube in the left rear corner of the filter
tank. This will allow frying oil to circulate within the filter tank.
10.
Turn
“ON” power switch, circulate frying oil for 5-10 minutes.
11.
Turn
“OFF” power switch.
12.
Remove discharge nozzle from holster and complete filtration by turning
“ON” power switch and filling fryer with filtered frying oil.
CAUTION: ALWAYS KEEP A FIRM HOLD ON THE NOZZLE HANDLE WHEN DISCHARGING
HOT OIL.
13. When filter tank is empty, turn power switch
“OFF”. DO NOT let pump run
dry.
14. Repeat steps for additonal fryers.
CLEANING
THE PUMP MOTOR CANNOT
BE
CLEAN
ED
WITH WATER
1.
Disconnect filter hose wand and drain.
2.
Disconnect filter tube and turn pump on for 3-5 seconds to force
oil
from pump. Failure to do this will cause pump or hose to
clog with
oil
.
3.
Unplug
oil
filter.
4.
Remove filter tube and clamp assembly
.
5.
Unscrew wing nuts on filter clamp assembly
.