V.1.0 | August 2014
PATRIOT
WARNINGS
• Do not touch any hot surfaces
• Do not immerse unit, cord or plug in liquid at any time
• Unplug cord from outlet when not in use and before cleaning
• Plug only into a 3-hole grounded electrical outlet of appropriate voltage
• Do not operate unattended
• Do not use this unit for anything other than intended use
• Do not use outdoors
• Always use on a firm, dry and level surface at least 12” from walls or any other obstruction
• Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has
been damaged in any manner
• Keep children and animals away from unit
• Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to
property loss and injury. All repairs should be done by authorized professionals only
• Ensure that the designated power supply is adequate for continual usage and the voltage is
correct
In order to protect the plates of your new grill during transportation, a layer of food-safe oil was
coated on the surface prior to shipment. This oil is harmless, but must be removed before you begin
to use. To remove, preheat the grill until the oil liquefies. See step 2 below. Once all of the oil is
removed you can begin to use your grill.
TO USE
1. Un-box unit and remove protective packaging and attach legs.
2. The cooking area is coated with an oil based protectant to prevent rusting during shipment. This
protectant will need to be cleaned off before use with a food safe degreaser.
3. Plug the power cord into the appropriately rated outlet.
4. The green power light will illuminate.
5. Turn the temperature controller clockwise to the desired temperature.
6. When the surface reaches the designated temperature, the indicator light will shut off and cycle
to maintain the temperature.
7. For best results allow unit to preheat for 15 minutes before placing food on the surface.
CLEANING - NOTE:
To maintain cleanliness and increase service life, the griddles should be
cleaned daily. Do not immerse the griddle in water or any other liquid, if liquid enters the electrical
compartment it may cause a short circuit or electrical shock
• Before cleaning or attempting to move griddle, unplug and let the unit cool completely
• Wipe the entire unit with a clean soft cloth until it is completely dry
• To avoid damage, do not use abrasive cleaners or scouring pads
• If soap or chemical cleaners are used, be sure they are completely rinsed away with clear water
immediately after cleaning. Chemical residue could damage or corrode the surfaces of the unit.
