ASSEMBLY INSTRUCTIONS
Page 2 of 3
6
. Magnifier lens change
(3X/5X lens):
●Turn off the light or unplug
the adapter to
cool
down
before replacing
the
magnifier lens.
● Unlock the plastic
lampshade
(B)
and take the
magnifier
lens(A) out.
● Put the new
magnifier
lens
into lamphead
and
lock it.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION
● Do not touch hot lens, guard, or enclosure.
● Keep lamp away from materials that may burn.
● Never tilt backwards.
● Do not use in wet locations, use indoors only.
● LED light output is strong enough to cause eye damage. Avoid staring directly at the LED light source
for prolonged periods of time.
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product.
Warning:Please do not put the
magnifier
lens(A) under the sunlight directly.
1. Lock the clamp set (E)
on the location you
need
by rotati
ng
the locking
screw
.
3
. Adjust the lamphead
direction you need and
tighten the cross knob
(D).
4
.
Connect the adapter (
G
)
with the cable (
F
),
and
then put the adapter into
the electrical
outlet.
E
PREPARATION
D
F
G
B
A
C
5. Touch switch to control the
brightness and color
temperature:
Touch the "M" button (C) ,
turn on the light.
1 touch: turn on, weak
white
light
2 touch: middle white light
3 touch: higher white light
4 touch:turn off
Long press for 2 seconds: white light
change to yellow
light.
1 touch: weak yellow light
2 touch: middle yellow light
3 touch: higher yellow light
4 touch: turn off with memory
function. When you turn
on
the lamp again, it keeps the same
color temperature
you turned off.
2
3
4
5
6
2
.
Put the lamp into clamp
set and fix the lamp with
the set screw.
Set
S
crew
1
Locking
S
crew
