Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape and Wire Cutters.
Page 2 of 3
SAFETY INFORMATION
PREPARATION
Quick Connector
Fixture installation
ASSEMBLY INSTRUCTIONS
3. Secure the ground stake (B) into the
stainless steel pipe (A). Then gently
insert the ground stake (B) into the
ground.
Never push the fixture into the
ground by the fixture head. (Fig.3)
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
CAUTION
Contact Pin
Power Wires
1. Open the connector (C) of fixture
wires and insert the wires of power
adaptor into the connector (C). (Fig.1)
2. Align the wires with the contact
pins inside the connector (C)
and close the connector (C).
(Fig.2)
2
C
Contact Pin
Power Wires
1
C
The Quick Connector intended for use
with SPT-2W 18G, SPT-2W 16G,
SPT-2W 14G and, SPT-2W 12G
Outdoor Cables.
3
A
C
B
Ground
4. Attach the fixture to the power cable with the quick
connector as show in Fig.4. To insure uniform
brightness the first fixture should be a minimum of 10
feet (3 meters) from the transformer “Fig.4”.
12
"(30cm)
10 ft. (3m)
GFCI
4
Risk of fire or electrical shock. Turn off power before assembly. Read all of these instructions thoroughly
before use. Keep this instruction manual in a safe place for future reference.
Do not install or connect wires with wet hands.
Do not install this product within 10 feet (3 meters) away from a pool, spa, fountain, or other body of water.
The main cable is intended for shallow burial - maximum depth must not exceed 6 inches (15 cm).
For low voltage landscape lighting systems only.
Do not step on, or drive over, the main cable.
This lighting fixture is only suitable for a 12v power supply.
This LED lamp is a highly efficient,extremely low wattage, energy saving product.
Use shielded cable for outdoor use in the following sizes: SPT-2W 18G, SPT-2W 16G, SPT-2W 14G, SPT-2W 12G
Do not submerge in water.
Do not repair or modify this product.
The maximum power of the LED module is 1.7W.
