P. 5
INSTALLATION
1.1. Uninstall mounting plate (A) by rotating cap nuts (BB) counterclockwise. Pass all wires through mounting plate
(A). Connect the green (ground) wire from the fixture to the green (ground) wire on the mounting plate. Connect the
fixture neutral (white) wire to house neutral (white) wire and the fixture black (live) wire to the house black (live) wire.
Use provided twist cap connectors (EE) to make all connections.
1.2. Thread the nuts onto bolts and nuts (DD) and insert into mounting plate (A). The length of exposed bolt can be
increased or decreased by adjusting the position of the nut. Ensure length of bolts and nuts (DD) are sufficient to
pass through the fixture and be secured by the provided cap nuts (BB) in later step.
1.3. Ensure the bolts (DD) stay in the mounting plate (A). Install the mounting plate (A) to your junction box with
bolts (CC).
1.4. Install the fixture back plate (B) to the mounting plate (A) by inserting the bolts (DD) through the mounting plate
(A) and fixture back plate (B), then use the cap nuts (BB) to tighten the fixture back plate (B). Ensure that cap nuts
(BB) are securely tightened.
1.5. Carefully install the bulb (not supplied) into the socket (base bulb is E26, and maximum bulb wattage is 60W).
1.6. Carefully insert the glass diffuser (C) into the frame (D), and secure it by bending the 2 metal clips on top of
the frame over the glass diffuser (C).
1.7. Install the frame (D) onto the lamp with the bolts (AA).
1.8. Apply a clear silicone water sealant (not supplied) around the outside perimeter of the fixture back plate (B).
1.1
1.2
1.4
1.3
1.6
1.7
1.5
BB
AA
FF
CC
EE
DD
Junction box
(not supplied)
Bulb (not supplied)
A
B
C
D
Not supplied
1.8
