Question/Comment/Missing Part?
Customer Service 1-800-205-6201
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK
TURN OFF OR DISCONNECT FROM POWER
WHILE INSTALLING OR SERVICING UNIT
Installation Instructions: 348-0126 (M-FP-12W) | 1 ft x 2 ft 2500 Lumen LED Flat Panel Light
This product is guaranteed against failure due to factory defects in materials or workmanship for five (5) years from the
date of purchase. This warranty is non-transferable and applies only to the original owner. Proof of purchase required
for repair or replacement. This warranty does not cover normal wear of parts or damage resulting from any misuse of
the product (i.e. using in extreme weather conditions), or alterations made to product.
- Do not look directly at the LED lights for any length of time.
- Do not remove protective lens covering LED lights.
EYES
Question/Comment/Missing Part?
Customer Service 1-800-205-6201
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK
TURN OFF OR DISCONNECT FROM POWER
WHILE INSTALLING OR SERVICING UNIT
Question/Comment/Missing Part?
Customer Service 1-800-205-6201
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK
TURN OFF OR DISCONNECT FROM POWER
WHILE INSTALLING OR SERVICING UNIT
Assembly & Installation Instructions: 370-5439 | 10ft LED String Light
DIMMING FEATURE
This fixture is compatible with most residential model dimmers, though dimming
performance is impacted differently by each model dimmer. A dimmer’s settings for
brightness range, as well as the number of other LED lights wired on the same circuit can
change this fixture’s dimming ability.
Preferred dimmers for this model include; Lutron’s MACL-153MR-WH, TGCL-153P, SCL-153PR-WH, SCL-153-
LA, DVCL-153P, MACL-153P, CTCL-153P, LGCL-153P, CTELV-303P-WH; Leviton’s IPL06-10Z, 6674, 6633-P,
IPI06-ILZ; and Cooper’s 9543DS, DSF15P-A-K, AAL06-C2-K.
CARE AND CLEANING
- Your fixture is made from quality materials that will last extended period of time. You may
want to periodically clean the surface of the fixture.
- Use a mild, non-abrasive glass cleaner. Do not use any solvents or harsh cleaning agents.
- Use a soft, non-abrasive cloth.
- When cleaning, make sure that they power is off. Do not spray liquid cleaner directly onto
LED’s driver, or wiring.
