Patriot Lighting FL2153, Manual, Page: 2 / 2

ASSEMBLY INSTRUCTIONS
1. Screw one lamp pole (C) tightly into the lamp base (A) .
2. Screw another lamp pole (C) tightly into the lamp pole (C).
3. Screw lamp head (B) tightly into the middle lamp pole (C).
B
C
C
A
Power
Color
Bright
Gooseneck
Screw lamp head (B) tightly into lamp base (C).
B
Unwind the clamp to the desired width,
place over a hard surface and tighten.
Screw lamp head (B) tightly into lamp clamp (D).
B
A
D
Instructions for Use
1. Plug the adaptor (AA) into a electrical outlet. Plug the adaptor into the lamp power jack.
2. To turn on the light, gently touch “Power” switch.
3. There are five color temperatures, gently touch “Color” button to adjust the color temperatures.
4. There are five brightness levels, gently touch “Bright” button to adjust the brightness.
5. To adjust the lamp direction by Gooseneck.
10-minute timer indicator
60-second timer indicator
ON/OFF switch
Color temperature button
Brightness button
AA
ON
60S 10M
Color -
Bright -
Color +
20% 100% 50%
Warm Cool
Mix
ON : ON/OFF switch
60S : 60 seconds timer
10M : 10 minutes timer
: increase brightness
Bright - : decrease brightness
Color + : increase color temperature
Color - : decrease color temperature
: Night light mode
20% : 20% brightness
50% : 50% brightness
100% : 100% brightness
Warm : Warm color temperature
Cool : Cool color temperature
Mix : Mixing color temperature
Remote control (BB) introduction: require 2 x AAA batteries ( not included )