Patriot Lighting E4145 Manual Download Page 6

Page 6 of 6

Clean the glass and coated metal surfaces with a non-abrasive cleaner. Do not use any cleaners with chemicals,

solvents or harsh abrasives, The motion detecting lens is coated with a specially painted finish and requires special

care when cleaning. Use only a soft dry cloth to dust or wipe the lens area. 

TROUBLESHOOTING

CARE AND MAINTENANCE

If the light does not work at all:

1. Make sure the wall switch and circuit breaker are on.

2. Make sure the wiring connection is correct.

3. Cover the sensor with dark color cloth to verify that the ambient light level is not too high.

In TEST Mode, if the light stays on over 5 seconds after motion is no longer detected:

1. Make sure the slide switch is at the TEST position.

2. Cover the sensor with a dark color cloth to verify that motion is not detected.

3. Make sure the light is not mounted near a barbecue, air conditioner or other heat source.

In OFF/AUTO Mode, if the light stays on full brightness after 3 minutes:

1. Make sure there is no motion detected by the sensor.

2. Make sure that it is not in manual override mode.

3. Make sure the light is not mounted near a barbecue, air conditioner or other heat source.

In PC / Manual override Mode, if the light stays on after dawn: 

1. Whether the ambient light level is too low.

If the light blinks:

1. Make sure the light is not mounted near a barbecue, air conditioner or other heat source.

In TEST/AUTO Mode, if the light doesn’t have low level brightness:

1. Make sure the bulb is dimmable, if you use LED bulb.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST  

FIVE-YEAR LIMITED WARRANTY: 

If, during normal use, this PATRIOT LIGHTING  lighting fixture breaks or fails due 

to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting 

fixture with the original sales receipt back to your nearest MENARDS  retail store. At its discretion, PATRIOT 

LIGHTING  agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIO

LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser 

with original sales receipt.

 

This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does 

not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to 

persons/property or costs.

 

This warranty does give you specific legal rights and you may have other rights, which vary 

from state to state.

 
 

R

R

R

R

If unable to fix any of the above issues, please consult a certified electrician.

Summary of Contents for E4145







Reviews: