www.patriotdocks.com
Step Four
Install Bunk Bracket verticals to both the Stationary and Lift Tubes,
the spacing between the bunk supports should be consistent. Secure
the bunk supports using the steel backer plate and M10x100mm bolt/
nut.
Adjust the side to side spacing between the bunk support verticals to
properly support the boat hull.
Align the bunk material with the Bunk Supports and mark the
mounting locations on the bunk material. The bunk mounting channel
can then be mounted to the bunk material at the marked locations
and is then ready to be installed on the lift.
Adjust spacing in anticipation to
match the watercraft
’
s hull.
