Patriot Docks
Manual Pontoon / Paddle Boat Lift
Assembly Instructions
Required Tools: 9/16” and 3/4” Wrench or Socket, Philips Screwdriver, Cordless Drill, 1/8” Drill bit
Assembly Hardware:
(16) 3/8”x 2” Bolt (frame assembly)
(16) 3/8”x 2.5” Bolt (Installing Jacks)
(8) 3/8”x 3
-
1/2” Bolt—may be plastic (mounting bumpers)
(40) 3/8” Nut
(8)
1/2”x 2.5” Bolt and Nut (Secures Drop Leg bases)
(16) Pan Head Screws (secure Bunk Pads)
Parts List:
(4) Lift Tube (1.5”x 3.5” x 54” long)
(4) Stringer Tube (1.5”x 3.5” x 54” long)
(4) Mending Insert (1.25”x 3.25” x 24” long)
(8) Poly Bunk Pad / Glide Plate (10”L x 1
-
1/2”W x 1/2”H)
(4)
Aluminum Screw Jacks
(4) Aluminum Backer Plate, 5
-
1/2”x 4”
(4)
Blue Jack Fenders
(5)
(4) Drop Leg Assembly
Lift tube
Stringer Tube
Mending Insert
(welded flat plate)
Helpful Tips:
The Aluminum Jacks are operated using a cordless drill or impact driver and 3/4” socket. The Jacks should be operated
at a slow speed or in low gear. Raise or lower each jack a couple inches at a time, working your way around the lift, op-
erating each jack evenly to prevent the unit from binding.
www.patriotdocks.com