Step 2:
Attach cedar or poly boards to the Aluminum Bench Supports using six
1
-
1/2”
long phillips head
screws. Maintain a half inch space between cedar boards and 1
1
-
1/2”
space from the end of
the boards as pictured below
(Fig. 4)
. When attaching poly boards, align the holes in the Alumi-
num Bench Supports with the pre
-
drilled holes in the poly board. Secure using six
1
-
1/2”
long
phillips head screws. (
Fig. 5)
and
(Fig. 6)
Step 3:
After decking has been attached to the Aluminum Bench Supports using phillips head screws,
the Aluminum Bench Supports can be set in place and attached to the Aluminum Uprights us-
ing the M10 x 100mm bolts, nuts and washers. See
(Fig. 6)
.
Step 4:
Aluminum Dock
-
Top bench only: Install plastic End
Caps into the ends of the aluminum deck boards.
Gently tap End Caps into place using a mallet
Fig. 5
Fig. 4
Fig. 6
