background image

2

This PATRIOT ANTENNA equipment is warranted to be free from defects in material and workmanship under
normal use and service. PATRIOT ANTENNA shall repair or replace defective equipment, at no charge, or at its
option, refund the purchase price, if the equipment is returned to PATRIOT ANTENNA not more than twelve (12)
months after shipment. Removal or reinstallation of equipment and its transportation shall not be at cost of PA-
TRIOT ANTENNA except PATRIOT ANTENNA shall return repaired or replaced equipment freight prepaid.

This Warranty shall not apply to equipment which has been repaired or altered in any way so as to affect its
stability or durability, or which has been subject to misuse, negligence or accident. This Warranty does not cover
equipment which has been impaired by severe weather conditions such as excessive wind, ice, storms, lightning,
or other natural occurrences over which PATRIOT ANTENNA has no control, and this Warranty shall not apply to
equipment which has been operated or installed other than in accordance with the instructions furnished by
PATRIOT ANTENNA.

Claimants under this Warranty shall present their claims along with the defective equipment to PATRIOT ANTENNA
immediately upon failure. Non-compliance with any part of this claim procedure may invalidate this warranty in
whole or in part.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER AGREEMENTS AND WARRANTIES, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION
TO THE DURATION OF THIS WARRANTY. PATRIOT ANTENNA DOES NOT AUTHORIZE ANY PERSON TO
ASSUME  FOR IT THE OBLIGATIONS CONTAINED IN THIS WARRANTY AND PATRIOT ANTENNA NEITHER
ASSUMES NOR AUTHORIZES ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR IT ANY
OTHER LIABILITY IN CONNECTION WITH THE EQUIPMENT DELIVERED OR PROVIDED.

IN NO EVENT SHALL PATRIOT ANTENNA BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTER-
RUPTION OF BUSINESS, OR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND.

In no event shall PATRIOT ANTENNA  be liable for damages in an amount greater than the purchase price of the
equipment.

Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you.

PATRIOT ANTENNA has the right to void the warranty when the antenna is installed by someone other then a
certified installer.

LIMITED TWELVE (12) MONTH WARRANTY

Patriot Antenna Systems

704 North Clark Street

Albion, MI 49224 USA

 Tel:   (517)629-5990

Fax:   (517)629-6690

E-mail:  [email protected]

Product Serial Number-  _________________

Date Purchased- ____________

Summary of Contents for PTX.1.1m













Reviews: