MANUAL
21846
AILONET 100
6.6.2002
AILONET USER MANUAL
Done
Copyright
Patria Ailon Oy 2002. All rights reserved.
8/24
1.3.4 First Connection Using Ethernet
PC can be connected directly to Ailonet using so called twisted Ethernet cable. PC and Ailonet can
also be connected together with a hub using traditional Ethernet cables.
DHCP configuration and possible fixed IP address can be found from CONFIGURATION STATUS
LIST – AILONET SAMPLE INFORMATION document delivered with the unit.
NOTICE: If Ailonet is configured to be a DHCP Client for Ethernet, it can not be accessed from
Ethernet – it can only act as a gateway from another interface (Bluetooth, 802.11b, etc.) to
Ethernet. This is due to fact that there’s no easy way of finding out Ailonet’s Ethernet IP address.
To access Ailonet via Ethernet, use web browser to connect to
(please verify the IP address from CONFIGURATION STATUS LIST – AILONET SAMPLE IN-
FORMATION)
1.3.5 After First Connection Is Established
When the first connection is established, your web browser might ask a confirmation for a certifi-
cate. You must accept it in order to proceed. After that Ailonet asks for administrator’s username
and password. These can be found from CONFIGURATION STATUS LIST – AILONET SAMPLE
INFORMATION document delivered with the unit. It suggested that the password is changed dur-
ing the first connection. For further information, see section 1.3.8, Security.
If there’s trouble in connecting Ailonet in the future, original factory settings can be restored using
Factory Settings Switch. See section 1.2.3 Switches for further details.
1.3.6 Selecting User Interface Language
User interface language can be changed from the top right corner of the screen by clicking appro-
priate flag. Currently English and Finnish are supported.
