Overview
LED Indicator Light
White Backlit
LCD Display
Blind Operation
Identification Point
Easily distinguish
and send the correct
training command
without eyes on by
touching and feeling
on buttons with
different structure.
Selecting Channels
Intensity Level
Adjustment
Antenna
Wrist Strap Pin
Transmitter
9
8
Action Buttons
Contact
Points
Charging Jack
(with cover)
Receiver Collar
On/Off
Button
Avoid the injuryto the
dog’s skin because of
the friction of metal
contact points.
Conductive Silicone Jacket
Operating Guide
Step
1
How to turn the p-collar 320 on/off
To turn the Transmitter on
To turn the Receiver Collar off
light shuts off.(This takes approximately three seconds.)
2. Release the On/Off Button.
1. Press and hold the On/Off Button until the Red
LED
Note: To extend the life of the batteries, turn the
Receiver
Collar off when it is not in use.
2. Backlight will stay for about 30 seconds. if no operation
then, backlight off.
3. LCD display will stay for about 5 minutes. if no operation
then, LCD display shuts off.
1. Press any of to active the Transmitter.
The backlight on.
To turn the Receiver Collar on
Press once, the green light on and will flash every
5 seconds under working mode.
To turn the Transmitter off
Transmitter DO NOT have turn off function. In order
to give a rapid reation by pressingTransmitter in
time when dogs have a badbehavior. In this case,
if need to turn on the transmitter, we may miss the
best training time.
