USB Controlled Multicolor Signal Beacon User Manual
20
(3) NE-WN-USB/NE-WT-USB
No.
Process
1
Check the positioning mark on
the main unit and the globe, and
remove the globe from the main
unit by rotating it so that it is in
the unlocked position.
2
Place
the waterproof sheet
between this product and the
mounting surface.
3
Attach the M4 screw to the
product.
(Installation screws and nuts are
not included with this product.
Be careful not to hit the drill
against the touch sensor.)
*Screws with a screw head
diameter of 6 mm to 8.5 mm can
be used.
4
Fix this product in two places.
(Recommended tightening
torque: 0.6 N
・
m)
5
Attach the globe to the main unit
so that the positioning mark is
aligned with the unlocked
position, and rotate the globe
until it is aligned with the
unlocked to locked position.
