4
Position narrow part of
tete-a-tete
between
bottom of armrests and top of flat bar.
Flat bar should be where the arrow is pointing.
Remove bolt that fastens the armrest to the chair
back. This bolt will not be used again. Push
tete-
a-tete
forward into wedge until bracket on the
tete-a-tete
and the hole in the armrest are
properly aligned.
Install bolt provided in kit assembly bag.
Connect the bracket through the arm and into
the chair back. Repeat on the other chair.
Your assembly is now complete! Be sure four
bolts are properly tightened. Do not lift and
move chairs with the
tete-a-tete
mounted
between them.
Step:4
Step:6
Step:5
Step:3
Patiova.com [email protected] 6649 N. Moscow Road Parkesburg, PA 19365 610-857-1359
