2
E
↓
H
G
↓
2
5
Step1: Attach 2 legs (C),2 legs (D) and table top (A) using 2
bolts(F), 2 spring rings(G) and 2 washers (H). Do not over
tighten.
Step2: Attach fixed loop(B) to 2 legs(C),2 legs (D) using 1 bolts
(E), 1 spring ring(G),1 washer (H). Do not over tighten.
Step3:Upon completion of full assembly and bolted up-all
screws can be tightened down.
Note:Please do not tighten any bolt until all bolts have been put
into right place.
If you tighten one bolt, it maybe cause other bolts out of posi-
tion.
