•
•
•
•
•
•
GENERAL SAFETY RULES
WARNING!
!
Read all instructions.
!
Failure to follow all instructions listed below may result in
serious injury.
Shade umbrella must be used with a heavy weighted stand (not included), and table capable of
firmly securing the Umbrella.
Umbrella is intended for sunshade and decorative purposes only – do not use this product in
strong wind, rain or storm conditions. Doing so may cause personal injury and/or damage to the
umbrella and personal property.
Always take the umbrella down during high or gusting wind and rain, when not in use and in
the off-season. Failure to do so may result in personal injury and/or property damage.
Keep children away from umbrella during assembly and operation. Do not let children play in or
around this product unsupervised.
Use caution when moving this product. For safety, lower the Umbrella before moving.
Do not use this product for other than intended use.
1
2
n the top half (1) aligns with
ther until the locking button
(1) preassembled umbrella (1)
(2) lower umbrella pole (1)
(1)
(2)
(Figure 1)
To construct pole: (Figure1)
1. Bring the two halves together so that the locking button o
the hole near the top of the lower half (2).
2. Depress the locking button, and slide the two halves toge
snaps into place, keeping the two halves locked together.
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the produc
been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS AND CONTENTS
Parts List
To raise the umbrella: (Figure 2)
1. Holding the pole with one hand, turn the crank handle clockwise until the umbrella is fully
extended.
2. To lower, simply turn the crank handle counter-clockwise.
(Figure 2)
