INSTALLATION INSTRUCTIONS
1. Ensure the desired mounting location can fit the unit in a horizontal orientation and is
near an outlet but free from from electrical cables. Communication lines, and pipes. And
the mounting location at least 1.8 m from the floor and at least 0.5 m from the ceiling.
3. Fasten the brackets at the appropriate distance of each other(45-55cm) .
2. In the canal of back side of the heater there are 4 square fastener washers 25×25mm.
Relieve 4 X M5*10 screws and fasten 2 brackets to the canal of the backside of the
heater by the help of screws.
4. Two other brackets are fastened by the wall Anchors at the appropriate distance on the
wall parallel to the floor(At least 1.8 m from the floor and at least 0.5 m from the ceiling).
5.Join the brackets on the heater with the brackets, fastened on the wall, with help of
figure screw-nuts. Install the heater under necessary angle(in the direction to the
area being heated).
ATTENTION:
Electric wiring for the heater has to be done by the qualified specialist.
45-55CM
M6*14 Bolt
Hex Nut
Round Gasket
- 10 -
- 11 -
