Tasks
Choose the correct part, then touch another cell specifying the other part(s) as
needed.
Multi-part Fixtures
Some lights support more than one intensity attribute. These lights will appear in
Light Type
as ‘Part 1’, ‘Part 2’, and so on, or as ‘Head 1’, ‘Head 2’ etc. In
most cases, each part should be patched to consecutive, contiguous blocks of
DMX slots. In some cases, when Intensity is controlled through a dimmer, the INT
channel may be separated from the attribute channels.
Properties
Allows you to give your light a Name which will be seen in the SELECT
grid. By default, a light’s label is its fixture type. Also allows you to specify what
gel color is being used by a specific light. This feature is typically used with
dimmers.
Copy Attributes
When programming lights you often work with one light to get the color and
maybe even position or gobos you want, then want to copy that work to a group
of other lights.
1.
t that easily visible to you from your programming
position and has the features you want to manipulate.
task to adjust the attributes.
3. Return to SELECT and press EDIT
.
4. The status bar will change:
5.
Select other lights you want to look like the first light by either touching
them directly or using other SELECT tools like Groups or Dynamic Tools.
59
