Pathos Acoustics Musiteca, Operating Instructions Manual

Page: 6 / 26

6
Connections & Controls
CAUTION
:
When connecting your Musiteca to other components, make sure all units are off.
NOTE : Pathos Acoustics recommends to use only high quality interconnecting cables. Not using appropriate cables
prevents your amplifier, your sources, and your loudspeakers from delivering their full potential. The wiring to and
from the amplifier should be arranged in a neat way. It is advisable to separate AC cords from signal and speakers
cables, to avoid hums and noise from being introduced into your system.
1) Select operating voltage:
Before to use Musiteca check the voltage selector. (230V or 115V).
if you change it, you need to change also the fuse with this values:
90V – 125V 50/60Hz the right value is F2A
210V – 240V 50/60Hz the right value is F1A
2) Serial number and operating voltage:
Serial number is indicated on the box and on the rear panel. Refer it whenever you call upon your Pathos dealer
regarding this product.
3) AC Main Inlet, Main switch, Main fuse:
This IEC-standard AC mains receptacle is used with the removable AC power cord to supply the Musiteca with power.
Connect the power cord to this receptacle and the AC mains outlet in the wall.
Main switch turns the machine on.
The unit remains powered as long as it is connected to the wall outlet, even if the unit itself is turned off.
If you are not going to use your unit for a long time, be sure to disconnect it from the wall outlet.
To disconnect the AC power cord, grasp the plug itself; never pull the cord.
Never bypass any fuse. In case of fuse replacement, please refer to your Pathos authorized dealer or to your nearest
service centre.