background image

M o d e l   Y e a r   2 0 1 2  

!

!

                         6

M a v e r i c k   B o a t   C o m p a n y ,   I n c .     •   3 2 0 7   I n d u s t r i a l   2 9 t h   S t .   •   F o r t   P i e r c e ,  

F l o r i d a   3 4 9 4 6   •   ( 7 7 2 ) - 4 6 5 - 0 6 3 1   o r   ( 8 8 8 ) - s h a l l o w   •   F a x :   ( 7 7 2 )   4 8 9 - 2 1 6 8

SWITCH AND INSTRUMENT PANEL

Gauges

The standard digital gauges include a Yamaha tachometer and a Yamaha speedometer. The tachometer has 
several built in features including an engine temperature monitor, oil level monitor and engine trim indicator. The 
speedometer includes a digital readout of the speed, an hour meter, trip meter and clock. For more information 
on the specifics of your Yamaha gauges, see your Yamaha owner's manual. 

Switch Panel 

The dual activation switches are set in a standard grid, these 
switches can be flipped either up or down to control different 
accessories. The accessories located directly above a switch are 
activated when the switch is in the “Up” position and the 
accessories located directly below the switch are activated when 
the switch is flipped into the “Down” position. For example, in the 
“Up” position the first switch in the top left corner will turn on the 
navigation lights, but if in the “Down” position it will turn on the 
anchor lights. The bilge switch is an on-demand switch to run your 
bilge pump and is used as a backup in case the float indicator in 
your bilge pump becomes clogged.

Switch Panel 

Summary of Contents for 2012 2300 HPS





















Reviews: