Path medical Senti, User Manual

Page: 13 / 44

Page 13 / 44
3.4 Device Hardware
3.4.1 On/Off Switch
The on/off switch is located at the right side of the device housing for handheld devices and at the
rear panel of the device housing for desktop devices (see
Figure 2 ). The on/off switch can be used to
switch on or off the device. For switching on the device, press the switch briefly. The welcome screen
appears. For switching off the device, press the switch for about 10 seconds.
Alternatively the device can be switched off via the off switch icon in the footer of the device
display.
In addition, the on/off switch can be used in some test modules (e.g. MAGIC, SUN) to show the
footer, which may be hidden in these modules during the test.
Figure 2: On/off switch for handheld (left) and desktop device (right, marked with blue circle)
3.4.2 Device Reset
If the device is stalled (i.e., no reaction when pressing the touch screen), the device can be reset.
After reset, the device can be started again with the on/off switch. The reset button does not reset
any device or test module settings or any other data on the device.
In order to reset the device, for handheld devices, press the reset button on the back side of the
device below the rubber casing (see
Figure 3 ). For desktop devices, press the on/off switch for
several seconds.
Figure 3: Device reset button for handheld device