background image

BlackBox 505 

Quick Start Guide 

Installing the Unit 

Guidance Screen 
 

Mount to the windscreen using suction 
mount and ram arm

 

Warning

 

– Please disconnect the unit from the power 

supply, if you need to jump start your vehicle. 

PWdoc0007 rev.2.3 

12v DC Plug

 

 
To cigarette lighter socket 
on vehicle.

 

Warranty Void if suction mount fails !!

 - Its is advised that the suction mount 

is removed from the windscreen when the unit is not in operation and 
reattached on a day to day basis. 

For a more permanent fixing please detach the ram ball from the suction mount and 
secure down in the vehicle.

 

Magnetic Receiver

 

 
Install on the roof of the 
vehicle (if the roof is not 
metal use the roof 
mount plate).

 

Summary of Contents for BlackBox 505

Page 1: ...12v DC Plug To cigarette lighter socket on vehicle Warranty Void if suction mount fails Its is advised that the suction mount is removed from the windscreen when the unit is not in operation and reattached on a day to day basis For a more permanent fixing please detach the ram ball from the suction mount and secure down in the vehicle Magnetic Receiver Install on the roof of the vehicle if the roo...

Page 2: ...re to the area of the screen where the required button or option is Touch Screen Brightness Power On Off Starting a Job 1 Position the vehicle the field that the job is to be done and power up the unit When displayed press Start BlackBox and once loaded press Setup 2 Select Width and enter the working width of the vehicle 3 Select Local Settings to setup Country Unit Measurement Language and Time ...

Page 3: ...art and drive around the field edge until the start point is reached The BlackBox will automatically close and save the boundary map displaying the field shape and area size in the mini map N B During the boundary run the boundary recording can be paused and restarted using the Start Pause Boundary button if there is a need to drive around obstacles To do a new boundary map redo steps 1 to 3 Start...

Page 4: ... begin When using a curved line it is important to use the longer edge of the field to set a guide line 2 At the beginning of a straight run press the Grid area to set point A 3 Drive to the end of the run and press the Grid area to set B The guidance line will appear ready for guidance 4 If working the headland continue around then line up to the set AB line and use the guidance to work the inner...

Reviews: