INTRODUCTION:
Hatz is a 2-channel analog hit-hat creation module combining 2 kinds
of sound source – LFSR noise and metallic.
The module is designed to give you a closed hat on one channel and
open on the other.
Each channel has a 2-pole Voltage-Controlled State Variable BP Filter
with individual and variable control over decay curve from linear to
exponential.
Hatz features an accent input and choke functionality with CV controlled
decay over the open hatz.
The LFSR circuit allows you design your own percussion sounds with
many kinds of textures depending on the clock rate, while the Hold input
manually opens the envelope via gates or CV.
SNR = 110dB
INSTALLATION:
* Disconnect your synth from the power source.
* Double check polarity from the ribbon cable, unfortanetly if you
damage
the module by powering in the wrong direction it will not be covered by
the warranty.
* After connecting the module check again you have connected the right
way, the red line should be on the -12V
