Make sure the power is disconnected before installation.
Installation
Installation
Make sure the power is disconnected before installation.
Safety
Bracket
1
2
3
5
4
Place the Main Part on a stable and
level surface. Plug in the Extrusion
Box and rotate left 45 degree until
it is securely locked.
Screw the Extrusion Rod into
the Extrusion Box. Connect
the Noodle Mold with Extrusion
Rod, and screw the Locker.
The Kneading Chamber has three
protrusions on the bottom. Map
them to the corresponding positions
on the Main Part.
Insert the Kneading Blade and Slat
into the Kneading Chamber,
close the top cover.
Pull the Safety Bracket in the
middle position to ensure the
top cover is securely fastened.
Note
:
Ensure the Kneading Blade is fully
inserted, it can gently shake the
Kneading Blade for easy insertion.
Note
:
Press
Button
Noodle
Mold
Down
Please noted the press button is in
the direction of noddle mold when
inserting the slat. Ensure the slat
is inserted in the end.
Connect the noodle mold with extrusion rod according
to the direction of arrow.
Ensure to screw the locker tightly.
The safety bracket must be fastened with top cover,
otherwise the machine can not work.
11111
11111
