PassTime USA
CONFIDENTIAL
PassTime GPS Install Guide v 2.5
Pg. 5
December 2010
Connecting the PassTime Red Wire (constant 12v)
The red wire provides constant 12v power to the
GPS
unit at all times. Connections should be
soldered and taped to provide a good electrical connection. Connectors have been provided, if
you are unable to solder the wires. Connect the red wire to a constant 12v source in the vehicle,
which has 12 volts on it at all times with the key in all positions, including the off position. There
are a variety of locations to access a 12v source, but typically it can be located in the steering
column wiring harness. It is best to verify the voltage using a multi-meter. PassTime recommends
that you avoid using a 12volt light tester.
.
