Version 1.20
- 9 -
3.4 Low Battery warning and battery change
The RFID lock uses 4 pieces of 1.5V AA alkaline batteries (6V).
When battery reaches to low voltage ;
Beep sounds five times.
Red LED lights
Low battery is recorded in the memory of
the User Card (Operator can know the low
battery of the lock when the card is read at
operator
’
s Program).
When low battery warning sign is displayed, please change the battery.
Open the battery case at main case.
Change four batteries.
When you pull out the battery, and do not insert the batteries in 3 minute, the
clock of the lock returns to default time
.(2008. 01.01)
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Please use
the Time/Control Card change card
to set the time of the lock.
(For setting of Time/Control Change card, please refer to
“
LOS (Locker
Operation System) User Manual
”
or LIS (Locker Installation System) User
manual.
3.5 Audit Trail
Put Audit Trail Card to the lock.
The latest event data (up to 18 events) will be downloaded from lock to the
Card. Wait until melody is on.
Read the Card at LOS program, and 18 event data will be saved to the PC.
