background image

3.2.4    What can I do with Master card? 

 

The function of the Master card is decided when Set up card is generated by lock 

installer from the following three functions. 

 

Door Open & User Card delete : Turn off the alarms, open the lock and delete 

old User card registration. 

 

Door Open and Close : Turn off the alarms and open the lock and close only. 

User card information in the lock is not deleted, 

 

3.2.5   Can I set the Master cards to open all locks or specific group of 

locks only? 

 

Yes. If a Master card is registered in all group of locks, this Master card can open all 

locks, and becomes Grand master card. If the other Master cards is registered in any 

specific group of locks only, this Master card can open this specific group of locks only, 

and becomes sub master card. 

 

 

3.3  User Card 

 

3.3.1  Free Selection  

 

The initial status of the lock in Free Selection mode is open (Latch is inside). 

 

  

- Initial Use -   

 

Select the empty locker. 

 

Put your belongings in the locker. 

 

Touch softly the front body of the lock to wake up the lock. Red Led is on, then 

place your card (or any form of user key) to the front body of the lock. 

 

Wait until the Green LED lights and Beep sounds once. 

 

Bolt will move out, and lock is closed.   

 

Close the door, and the lock will be remained at closed status. 

 

- Open the lock - 

 

Touch softly the front body of the lock. 

 

Red Led is on and put close your card to the front body of the lock. 

Version 1.2                  

- 7 -                                         2010-10-06

 

Summary of Contents for HP100














Reviews: