Passtech AP300, User Manual, Page: 7 / 19

AP300 (ACCESS POINT) User Manual
Version: 1.0
7 http://www.esmartlock.com
③
Select an AP which you want to configure from the AP list, and input values in
‘
Ethernet Setting
’
referring to the description below.
Item Description
Local IP
AP IP
Make sure this IP is only assigned to this AP
Local Port Assign the port number on your own (Default: 5000)
Subnet Input the value (Subnet Mask) checked in Command Prompt
Gateway Input the value (Default Gateway) checked in Command Prompt
Server IP Input the value (IPv4 Address) checked in Command Prompt
Server Port Input the port number as set in Server program (Default 2274)
④
Click
‘
Setting
’
button to save the information to the selected AP, and check the message
‘
Setting OK
’
from the message box below.