USB Power Delivery Tester
– User’s Guide
Page 15
8-
Turn off the PC and slide the KCU116 board power switch SW1 to the OFF
position. Wait a few seconds and then slide SW1 to ON and turn on the PC.
The card is now ready for testing.
Technical Specifications
Product Code
PM142
PCIe Standard
Gen3, Gen2 and Gen 1 (also compatible with Gen4 and Gen 5, running at
Gen3 speeds)
Physical
connector
x8 PCIe edge connector (can be used on x1 using a x8 to x1 adapter)
Max speed
8 Gbits/sec per lane
PCIe Transfer
modes
DMA - Direct memory access
FPGA
Xilinx Kintex Ult XCKU5P-2FFVB676E FPGA
Clock speed
100MHz
Device
memory
1 GB DDR4 component memory (two [256 Mb x 16] devices)
Operating
Voltage
12VDC via included external adapter
Dimensions
Height: 6.927 inch (17.59 cm)
Thickness (±5%): 0.061 inch (0.1549 cm)
Length: 9.5 inch (24.13 cm)
Weight
256g
EMC
standards
EN 55022:2010, EN 55024:2010
Storage
Temperature
-25C to 60C
Usage
Temperature
0C to 45C
Humidity
10% to 90% non-condensing
Model
number
PMPCIE03
Electrical
Compliance
CE
RoHS (Lead
free)
YES
Disclaimer
This product is not warranted nor intended to be used for medical, life support, life
saving, critical control or safety applications, unless pursuant to an express written
agreement with PassMark Software. Furthermore, PassMark Software does not
authorize this product for use as critical components in life-support systems where a
malfunction or failure may reasonably be expected to result in significant injury to the
user. The inclusion of this PassMark Software product in life-support systems
application implies that the manufacturer assumes all risk of such use and in doing so
indemnifies PassMark Software against all charges.
