Inline PSU Tester
– User’s Guide
Page 14
Page
Mode 1
Mode 2
Mode 3
Mode 4
Table 10
Input and output connectors
The tester has four inputs and four outputs terminals. The input terminals marked with
“In” suffix should be connected to PSU. The output terminals which are only used in
inline configuration are marked with “Out” suffix and should be connected to
motherboard. The “SATA In” input is a bit tricky as the orientation of the SATA
cable is important. Make sure the pins inside the SATA connector make electrical
contact with the pads on the PCB, otherwise the hard drive won’t work.