8
Maintenance:
Leave it on or turn it off:
The product is designed to be left on all the time. The
exception to this might be a case where the preamp will not be used for an extended
time - in that case it can be turn off.
Cleaning:
The fi nish can be damaged by harsh cleaners and abrasive cloths. We
fi nd a damp soft cloth works best. You can also use a mild solution of windex or white
vinegar but be careful to avoid the acrylic window. The acrylic window should only
be cleaned using “plastic cleaner & polish”.
Remote batteries:
The two AAA batteries should be replaced every six months at
least. The batteries are located under the remote back. This is held in place with four
4-40 phillips fl at head screws. Please note the polarity of the batteries, putting them in
wrong could cause damage.
Replacing the fuse:
The fuse should only be replace with the same type and size as
indicated on the rear. Audio Specialty FUSE: NOTE: The “Overload” and “Time Delay
characteristics” will differ slightly (due to the different metallurgy of the fuse elements)
between commercial grade and audio grade fuses. We can’t guarantee that
your audiophile grade fuse, won’t blow at a different in-rush current threshold, than
your stock commercial fuse. Use of other than approved fuses, may invalidate your
product warranty and result in product damage.
INT-60 Specs:
Inputs:
Four(4) 2 XLR/RCA + 2 RCA
Gain
30/36dB
Output power
60 Watts rms @ 8 ohms
120 Watts rms @ 4 ohms
Distortion:
1% @ 60 Watts, 8 ohms, 1 KHz
Frequency response:
-6 dB @ 80 KHz
Residual Noise
< 250 uV output, unweighted 20 to 20 KHz
Damping Factor:
150
Input Impedance:
45 Kohm
Idle Power draw:
~3 Amps @ 120 VAC
Dimensions:
19”w x 21.25”d x 7.6”h
Weight:
93 lbs
How to replace the fuse:
Summary of Contents for INT-60
Page 1: ...1 pass INT 60 Owner s Manual ...
Page 7: ...7 ...
