November 18, 2010 Rev 1.02
11
Wayne Colburn's exceptional volume control in conjunction with the
fluorescent display gives the user ability to replicate volume levels with
absolute accuracy in steps of roughly 1 dB.
The remote control uses multi-button direct access architecture. This
remote is designed to operate several pieces of Pass Labs electronics,
not all of the functions available on this remote will be applicable to
your Pass Laboratories XP-10.
The Remote control operation is, or should be very intuitive in
operation; we have attempted to make its operation as familiar as
possible. Where applicable the remote mirrors the front panel controls.
Power, tape and ext. amp on (external amplifier turn-on) have no
reality with the XP-10. These specific control functions have no effect
on this product.
MUTE: pressing mute once will quiet the pre-amplifier outputs;
pressing mute a second time will return you to the previous volume
control setting
INPUT SELECTION: Pressing. 1,2,3,4,5 will immediately move the
input selection to that input selection; volume and balance settings will
not be disturbed.
BALANCE: Pressing balance left (<) or balance right (>) will increase
the level in the left or right speaker, depending upon which button is
pushed.
VOLUME: Pressing the increase (^) button or the decrease (v) button
will shift the volume setting 1dB, holding a button down will increase or
decrease the level until such time as you either release pressure on
the button or reach the limits of the volume control.
