®
F o r c e S e n s o r
PS- 2 1 0 4
2
Inverted Output
By default, the sensor registers pushing as a positive force and
pulling as a negative force. To register pulling as positive and
pushing as negative, select the
Force (Inverted)
measurement in
DataStudio or on your datalogger.
Sensor Mounting
Mounting the Sensor on a Rod
Slide the sensor onto a rod and secure it with the thumbscrew as
illustrated.
Mounting the Sensor on a PASCO Cart
1.
Insert the included Cart/Bracket thumbscrew through the
hole in the senor labeled
Cart
.
2.
Screw the thumbscrew into the threaded hole on the top of
the cart.
Mounting the Sensor on an IDS Bracket
1.
Insert the included Cart/Bracket thumbscrew through the
hole in the IDS Force Accessory Bracket (PASCO part
CI-6545).
2.
Screw the thumbscrew into the hole in the sensor labeled
IDS Bracket
.
Specifications
Technical Support
For assistance with any PASCO product, contact PASCO at:
For more information about the Force Sensor and the most
up-to-date version of this Instruction Sheet, visit:
www.pasco.com/go?PS-2104
Limited Warranty
For a description of the product warranty, see the
PASCO catalog.
Copyright
The PASCO scientific 012-07297E
Force Sensor Instruction
Sheet
is copyrighted with all rights reserved. Permission is granted to
non-profit educational institutions for reproduction of any part of this man-
ual, providing the reproductions are used only in their laboratories and
classrooms, and are not sold for profit. Reproduction under any other cir-
cumstances, without the written consent of PASCO scientific, is prohibited.
Trademarks
PASCO, PASCO scientific, and PASPORT are trademarks
or registered trademarks of PASCO scientific, in the United States and/or
in other countries. All other brands, products, or service names are or may
be trademarks or service marks of, and are used to identify, products or
services of, their respective owners. For more information visit
www.pasco.com/legal.
Range
±50 N
Resolution
0.03 N
Maximum Sample Rate
1000 samples/s
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax:
916-786-7565
Web:
www.pasco.com
Email:
