1.Fully charged 5.DC input
2.Charging 6.DC output
3.Charging (Rear) 7.Charging socket (Rear)
4.Fully charged (Rear) 8.Charging cable
CAUTION!!
The above chargers are specially designed for Ni-MH battery used in portable
transmitters/receivers only. Before charging, please make sure that the batteries are
Ni-MH rechargeable type.
Never try to charge an ordinary Zinc oxide or Alkaline battery as this may result in
explosion or fire.
5
Charging the transmitters:
1
.Make sure that the batteries installed in the transmitter are rechargeable NiMH type
and transmitter power has been turned off.
2.Connect the adaptor to the DC IN port of XC33 with its end to the wall outlet or DC
output of PIRA250.
3.Place the transmitter into the slot and charging process will start automatically.
4.When another transmitter has to be charged simultaneously, simply connect a
charging cable between the external charging port and this transmitter.
5.There are 2 sets of LED to indicate the charging condition of both transmitters.
The left set indicates the front transmitter and the right for the rear one. During
charging the RED LED will keep lit. When charging is finished, the process will stop
automatically and the GREEN LED will light up.
8
Charging Station XC
Parts and Functions:
